06 / Product family
Timing Belts
Catalog series for synchronous motion, positioning or fixed transmission-ratio systems. Tooth profile, pitch, width and length require confirmation against the application.
Synchronous drivePositioningAutomation equipment
Verified model index
Use the family and model marking as the starting point.
Select a model to carry its identity into the inquiry form. Model codes are not independent sellable SKUs until detailed specifications are confirmed.
Profile reference and quote input
Timing-belt selection starts with tooth profile and pitch, then adds belt width and length or tooth count.
SeriesCatalog referenceSend for quote
Inch trapezoidal pitchMXL 0.080 in, XL 0.200 in, L 0.375 in, H 0.500 in, XH 0.875 in and XXH 1.250 in.Profile, pitch, belt width and length or tooth count
Metric trapezoidal pitchT2.5, T5 and T10 use 2.5 mm, 5 mm and 10 mm pitch; AT5 and AT10 use 5 mm and 10 mm pitch.Profile, pitch, width and length or tooth count
Metric curvilinear pitch2M, 3M, 5M, 8M and 14M identify 2 mm, 3 mm, 5 mm, 8 mm and 14 mm pitch series.Profile, pitch, width and length or tooth count
Double-sided timingDXL, DL and DH are double-sided trapezoidal series; DS5M, DS8M and DS14M are double-sided metric curvilinear series.Complete marking, width, length or tooth count and tooth arrangement
Trapezoidal timing belts
Curvilinear timing belts
Double-sided timing belts
Technical resource
Review the supplied catalog before requesting confirmation.
The PDF contains the current model-series index. Detailed dimensions, construction, standards and commercial terms remain subject to order confirmation or future verified data.